Resin is a more demanding material than filament. The wrong bottle can leave prints brittle, yellow, full of micro-bubbles, or stubbornly stuck to the build plate. The right resin makes the entire workflow smoother: clean cures, predictable detail, low odor, easy post-processing, and reliable results across different machines. ANTINSKY Standard Resin sits firmly in the second category, and is the bottle we recommend for most people starting out with resin printing.
What "Standard" Actually Means
By Inno Uncle
ANTINSKY Standard Resin is a general-purpose photopolymer tuned for the wavelength and power output of common 405 nm LCD and DLP printers. It is not the cheapest resin on the market, and it is not the most expensive. It is engineered to hit a sweet spot: a clean cure profile, low shrinkage, easy release from the build plate, and a neutral color that takes paint and primer well. The pigments are tightly controlled, which means the same gray from one bottle matches the gray from the next bottle, even months apart.
Print Quality
Detail resolution on a properly calibrated machine is excellent for a standard resin. Layer adhesion is strong, which means functional prototypes snap cleanly rather than delaminating. Surface finish is smooth and uniform, with minimal pitting or layer shifts. For miniatures at 32 mm and above, the level of detail is more than enough. For functional parts, the cured resin has a flexural strength suitable for jigs, fixtures, and one-off assemblies.
Workflow Notes
Shake the bottle for 30 seconds before pouring. Use a calibrated exposure for your specific printer — most ANTINSKY Standard Resin bottles come with a starting table for popular machines, but you will still want to run a Cones of Calibration test to dial in your exact setup. Bottom exposure of 30 to 40 seconds, normal exposure of 2.0 to 2.5 seconds at 0.05 mm layer height is a good starting range. The resin cleans up easily in IPA, and post-cures to its final strength in 3 to 5 minutes under a 405 nm UV lamp. The smell is mild compared to off-brand resins, but you should still print in a ventilated space or with an enclosure that has a carbon filter.
Color Options and Use Cases
The ANTINSKY Standard Resin collection ships in gray, white, black, and a transparent option, all from the same base formulation. Gray is the most forgiving for showing fine detail. White is the best base for painting. Black hides minor layer lines. Transparent is for parts that need light transmission, though true clarity requires specific clear resins and a more involved workflow. For most users starting out, a 1 kg bottle of gray covers the first 200 to 300 prints of a typical size.
Why Buy ANTINSKY Resin
The honest reason is consistency. Off-brand resins can vary from batch to batch, which means your settings from last month might not work this month. ANTINSKY tests every batch, tracks exposure and mechanical data, and ships with reliable documentation. That is the difference between a frustrating hobby and a productive one. Browse the full resin catalog at InnoStation 3D for specialty options like dental, castable, and engineering grades, all built on the same quality platform.
Storage and Disposal
Resin has a shelf life. Keep the bottle away from sunlight, ideally in the original box, and use it within 12 months of opening. Uncured resin on tools, build plates, and paper towels should be cured under UV light before disposal — never pour liquid resin down the drain. The simple workflow is: wipe up with paper towel, expose the paper towel to a UV lamp until solid, then dispose with regular trash. A few extra minutes of care make resin printing as clean as any other part of the workshop.
Ready to try ANTINSKY filament?
Shop ANTINSKY Filament →