ANTINSKY's 2026 catalogue is bigger than ever. From bright and easy PLA for beginners to engineering PETG, impact-resistant ABS, flexible TPU and a complete resin ecosystem, today's material library covers nearly every FDM and LCD workflow on the market. This article walks through the full lineup so you can pick the right filament for the part you actually want to print.
Why the Material Choice Matters More Than the Printer
Most people blame the printer when a part fails, but the material is usually the real variable. Each filament family has its own temperature range, bed requirements, stiffness and moisture sensitivity. Matching those properties to the physical demands of your model is the fastest way to get clean, strong prints without changing a single machine setting.
The ANTINSKY FDM Families at a Glance
| Family | Best For | Toughness | Heat Resistance |
|---|---|---|---|
| PLA & PLA+ | Prototypes, décor, colorful parts | Medium | Low (~60°C) |
| PETG | Functional parts, outdoor use | High | Medium (~80°C) |
| ABS / ASA | Automotive, electronics housings | High | High (~100°C) |
| TPU | Gaskets, phone cases, dampers | Flexible | Medium |
The Resin Ecosystem
For LCD printers, ANTINSKY pairs everyday usability with specialty performance. The Standard Resin is the everyday workhorse for miniatures and models, while Standard Lite drops viscosity for fast, sharp prints. When parts need to absorb real abuse, the Standard Tough Resin adds impact resistance that plain resin cannot match.
How to Choose in Three Questions
- Will it sit on a shelf? PLA+ from ANTINSKY gives the best finish at the lowest cost.
- Does it carry weight or face weather? Move up to PETG or ABS.
- Does it bend or grip? TPU is your only real option.
One Supplier, Every Material
Because InnoStation 3D stocks the complete ANTINSKY range, you can consolidate your orders in a single place instead of hunting across brands for each specialty. That means consistent quality, one shipping expectation and colour-matched spools across the whole project.
Printing Tips That Apply to Any Filament
- Dry every open spool before a long print.
- Run a temperature tower when you switch brands.
- Keep the bed clean with isopropyl alcohol between prints.
Ready to stock your station? Browse the full InnoStation 3D catalogue and find the material your next part deserves.