Real-World Filament Compatibility: ANTINSKY PETG and White PLA+ on Bambu Lab X2D and H2D
Understanding filament compatibility across different machines is crucial. We tested ANTINSKY PETG on the Bambu Lab X2D and ANTINSKY White PLA+ on the H2D — both producing exceptional results.
Test Setup
| Parameter | ANTINSKY PETG | ANTINSKY PLA+ White |
|---|---|---|
| Printer | Bambu Lab X2D | Bambu Lab H2D |
| Nozzle Temp | 240°C | 215°C |
| Bed Temp | 75°C | 55°C |
| Print Speed | 200-300 mm/s | 200-350 mm/s |
| Layer Height | 0.2 mm | 0.2 mm |
PETG on X2D: Key Observations
Layer adhesion was excellent — test cubes showed near-perfect bonding with no delamination under torsional stress. The PETG extruded smoothly up to 300 mm/s without clogging.
- Surface: Glossy, minimal stringing at 1.5mm retraction/40mm/s
- Accuracy: Within ±0.1mm on 20mm cubes
- Bridges: Clean up to 40mm without support
White PLA+ on H2D: Speed & Precision
At 215°C, the filament flowed beautifully at 350 mm/s with crisp detail and no underextrusion. The pure white provides excellent contrast for detailed models.
Recommended Settings
| Parameter | PETG (X2D) | PLA+ White (H2D) |
|---|---|---|
| Nozzle | 235-245°C | 210-225°C |
| Bed | 70-80°C | 50-60°C |
| Speed | 200-300 mm/s | 200-350 mm/s |
| Retraction | 1.5mm @ 40mm/s | 0.8mm @ 40mm/s |
Looking for ANTINSKY PETG or ANTINSKY PLA+? Both available at InnoStation 3D.
— Inno Uncle